proFPGA USBIF Verification Platform

System Components

The proFPGA USBIF Verification Platform is a predefined configuration of readily available proFPGA components.

This configuration has been defined by the USB-IF and is part of the recommended toolchain for the USB compliance test.

proFPGA USBIF Verification Platform
FPGA Type	Xilinx Virtex XC7V2000T
Capacity	Up to 12 M ASIC gates
FPGA internal Memory	46,512 kbits
Signal rate	Up to 1 Gbps (standard I/O)/ 12.5 Gbps (MGT)
Extension sites	Up to 8 Extension sites with High Performance (up to 21 Gbps) connectors
I/O resources	Overall up to 1084 signals for I/O 4x148 I/Os to top side connectors 3x148 and 1x48 I/Os to bottom side connectors Single-ended or differential
High-Speed I/O resources	Up to 8 individually adjustable I/O voltage regions 8 individually adjustable voltage regions on XC7V2000T FPGA Module Stepless from 1.2 up 3.3V(depending on used FPGA Module) Automated detection of daughter card and adjustment of right voltage
Voltage Regions	Up to 8 individually adjustable I/O voltage regions 8 individually adjustable voltage regions on XC7V2000T FPGA Module Stepless from 1.2 up 3.3V(depending on used FPGA Module) Automated detection of daughter card and adjustment of right voltage
Configuration	With host software via Ethernet, USB 2.0 or standalone over USB stick
Order Code	PROF-USBIF-VP