Information on Zynq Ultrascale Board
The proFPGA Zynq™ UltraScale+™ ZU19EG is part of the proFPGA product range. The concept of proFPGA is a mix and match multi FPGA solution for the ASIC Prototyping market.
Zynq Ultrascale Board
- Xilinx Zynq™ UltraScale+™ ZU19EG FPGA
- Embedded Quad-core ARM® Cortex™-A53
- Embedded Dual-core ARM® Cortex™-R5
- USB 3.0, Gigabit Ethernet, DDR4 & SPI Flash memory
- 531 standard I/Os and 16 high speed serial transceivers
Product Summary of Zynq Ultrascale Board
The system of the Zynq Ultrascale base is the proFPGA motherboard (uno, duo or quad) on which the proFPGA Zynq™ UltraScale+™ ZU19EG and various other FPGA modules can be plugged. On top of the FPGA modules, different interfaces or memory boards can be easily added as well. The ZU19EG FPGA module offers a complete and powerful embedded processing platform for high performance SoC Prototyping, IP verification and early software development.
Equipped with a Xilinx Zynq™ UltraScale+™ ZU19EG FPGA which combines a user FPGA with two ARM Multi Core Processors (Embedded Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5) and on board interfaces like USB UART and SDIO, the board offers a complete embedded processing platform. Further interfaces like USB 3.0, Gigabit Ethernet, Display Port, SATA or CAN can be easily added via the Zynq UltraScale+ Interface Board. In addition it offers already DDR4 memory via SODIMM slot and single QSPI flash memory.
The FPGA module offers a total of 4 extension sites on the top and bottom side with a total of 531 free standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards or to easily interconnect it to further proFPGA FPGA modules to extend the capacity.
|proFPGA Zynq™ UltraScale+™ ZU19EG FPGA Module Specification|
|FPGA Type||Zynq™ UltraScale+™ ZU19EG (speedgrade 1,2 )|
|Capacity||6.2 M ASIC gates|
|Embedded Processor Core|
Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5
|Interfaces Processor System|
|Memories Processor System|
|Signaling rate||Up to 1.2 Gbps (standard I/O)/ 12.5 Gbps (MGT)|
Up to 5 extension sites with high performance connectors
|High Speed I/O transceivers|
|Available interface boards|
PCIe Gen1/Gen2/Gen3, MIPI, DVI, DDR3/DDR4/Flash/LP DDR4 memory, etc.
|Clocking over proFPGA duo/quad Motherboard|
|System Requirements||Works only with proFPGA uno, duo or quad motherboard|
Via Ethernet and USB or PCIe with proFPGA Builder Software
|Power||External (optional) ATX Power Supply (12 V, 24 - 35 A output)|
|Product article number||PROF119 FM-XCZU19EG-R1|
|Order code||PROF-FM-XCZU19EG-1/PROF-FM-XCZU19EG-2 (speedgrade 1/2)|