FPGA Module ZU11EG

Technical highlights

Xilinx Zynq™ UltraScale+™ ZU11EG FPGA
Embedded Quad-core ARM® Cortex™-A53
Embedded Dual-core ARM® Cortex™-R5
USB 3.0, Gigabit Ethernet, DDR4 & SPI Flash memory
378 standard I/Os and 16 high speed serial transceivers

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Part of this modular and flexible system concept is the proFPGA Zynq™ UltraScale+™ ZU11EG FPGA module, which can be easily mounted on the proFPGA uno, duo or quad motherboard and mixed together with various other proFPGA FPGA modules. The ZU11EG FPGA module addresses customers who require a complete and powerful embedded processing platform for high performance SoC Prototyping, IP verification and early software development.

Equipped with a Xilinx Zynq™ UltraScale+™ ZU11EG FPGA which combines a user FPGA with two ARM Multi Core Processors (Embedded Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5) and on board interfaces like USB UART and SDIO, the board offers a complete embedded processing platform. Further interfaces like USB 3.0, Gigabit Ethernet, Display Port, SATA or CAN can be easily added via the Zynq UltraScale+ Interface Board. In addition the board offers already DDR4 memory via SODIMM slot and single QSPI flash memory.

The FPGA module offers a total of 3 extension sites on the top and bottom side with a total of 378 free standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards or to easily interconnect it to further proFPGA FPGA modules to extend the capacity.

proFPGA Zynq™ UltraScale+™ ZU11EG FPGA Module Specification
FPGA Type	Zynq™ UltraScale+™ ZU11EG (speedgrade 1,2 )
Capacity	3.5 M ASIC gates
Embedded Processor Core	Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5
Interfaces Processor System	On-Board USB UART interface for debugging SDIO External Extension Boards (e.g. via Zynq UltraScale+ Interface Board) USB 3.0 Gigabit Ethernet CAN Display Port GPIO I2C SATA PMU access
Memories Processor System	DDR4 memory via SO DIMM module Single Quad SPI Flash Memory
Signaling rate	Up to 1.2 Gbps (standard I/O)/ up to 16 Gbps (MGT) depending on FPGA speedgrade
Extension sites	Up to 4 extension sites with high performance connectors
I/O resources	378 per FPGA module 2 x 153 I/Os (High Performance Bank) to 2 x top/1 x bottom extension sites 1 x 72 I/Os (High Denistity Bank) to top extension site Single-ended or differential 52 x dedicated I/Os to Processor System
High Speed I/O transceivers	16 per FPGA module 1 x 8 MGTs (up to 16 Gbps (MGT) depending on FPGA speedgrade) to top extension site A2 1 x 8 MGTs (up to 16 Gbps (MGT) depending on FPGA speedgrade) to top extension site B2 4 dedicated MGTs to Processor System
Available interface boards	PCIe Gen1/Gen2/Gen3, MIPI, DVI, DDR3/DDR4/Flash/LP DDR4 memory, etc.
Voltage regions	3 individually adjustable voltage regions per FPGA Module Stepless from 1.2V up 3.3V for HD IOs and 1.0. to 1.8 for HP IOs
Clocking over proFPGA duo/quad Motherboard	8 global clock and sync signal inputs per motherboard X fully synchronous derived clocks with sync signals
System Requirements	Works only with proFPGA uno, duo or quad motherboard
Configuration	System configuration via DMBI (Ethernet, USB or PCIe) with proFPGA Builder Software FPGA configuration via QSPI flash or SDIO (μSD card slot) on FPGA module or JTAG on motherboard
Power	External (optional) ATX Power Supply (12 V, 24 - 35 A output)
Dimensions	5.91" x 0.95" x 5.91" / 150 mm x 24 mm x 150 mm (width x height x depth) 0.25 kg weight
Product article number	PROF119 FM-XCZU11EG-R1
Order code	PROF-FM-XCZU11EG-1/PROF-FM-XCZU11EG-2 (speedgrade 1/2)

FPGA Module ZU11EG

Technical highlights

Product Summary

FPGA Prototyping Products Overview

proFPGA Virtex® UltraScale+™ FPGA Modules

proFPGA Stratix® 10 FPGA Modules

Miscellaneous

proFPGA Interconnectboards/-cables

proFPGA Memory Boards