Information on Zynq Ultrascale Board

The proFPGA Zynq™ UltraScale+™ ZU19EG is part of the proFPGA product range. The concept of proFPGA is a mix and match multi FPGA solution for the ASIC Prototyping market.

Zynq Ultrascale Board

Zynq Ultrascale Board

Technical highlights

  • Xilinx Zynq™ UltraScale+™ ZU19EG FPGA
  • Embedded Quad-core ARM® Cortex™-A53
  • Embedded Dual-core ARM® Cortex™-R5
  • USB 3.0, Gigabit Ethernet, DDR4 & SPI Flash memory
  • 531 standard I/Os and 16 high speed serial transceivers

Product Summary of Zynq Ultrascale Board

Grafik on Zynq Ultrascale

The system of the Zynq Ultrascale base is the proFPGA motherboard (uno, duo or quad) on which the proFPGA Zynq™ UltraScale+™ ZU19EG and various other FPGA modules can be plugged. On top of the FPGA modules, different interfaces or memory boards can be easily added as well. The ZU19EG FPGA module offers a complete and powerful embedded processing platform for high performance SoC Prototyping, IP verification and early software development.

Equipped with a Xilinx Zynq™ UltraScale+™ ZU19EG FPGA which combines a user FPGA with two ARM Multi Core Processors (Embedded Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5) and on board interfaces like USB UART and SDIO, the board offers a complete embedded processing platform. Further interfaces like USB 3.0, Gigabit Ethernet, Display Port, SATA or CAN can be easily added via the Zynq UltraScale+ Interface Board. In addition it offers already DDR4 memory via SODIMM slot and single QSPI flash memory.

The FPGA module offers a total of 4 extension sites on the top and bottom side with a total of 531 free standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards or to easily interconnect it to further proFPGA FPGA modules to extend the capacity.

proFPGA Zynq™ UltraScale+™ ZU19EG FPGA Module Specification
FPGA TypeZynq™ UltraScale+™ ZU19EG (speedgrade 1,2 )
Capacity6.2 M ASIC gates
Embedded Processor Core

Quad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5

Interfaces Processor System
  • On-Board
    • USB UART interface for debugging
    • SDIO
Memories Processor System
  • DDR4 memory via SO DIMM module
  • Single Quad SPI Flash Memory
Signaling rateUp to 1.2 Gbps (standard I/O)/ up to 16 Gbps (MGT) depending on FPGA speedgrade
Extension sites

Up to 5 extension sites with high performance connectors

I/O resources
  • 531 per FPGA module
    • 3 x 153 I/Os (High Performance Bank) to 2 x top/1 x bottom extension sites
    • 1 x 72 I/Os (High Denistity Bank) to top extension site
  • Single-ended or differential
  • 52 x dedicated I/Os to Processor System
High Speed I/O transceivers
  • 16 per FPGA module
    • 1 x 8 MGTs (up to 16 Gb/s depending of FPGA speedgrade) to top extension site A2
    • 1 x 8 MGTs (up to 16 Gb/s depending of FPGA speedgrade) to top extension site B2
  • 4 dedicated MGTs to Processor System
Available interface boards

PCIe Gen1/Gen2/Gen3, MIPI, DVI, DDR3/DDR4/Flash/LP DDR4 memory, etc.

Voltage regions
  • 4 individually adjustable voltage regions per FPGA Module
  • Stepless from 1.2V up 3.3V for HD IOs and 1.0. to 1.8 for HP IOs
Clocking over proFPGA duo/quad Motherboard
  • 8 global clock and sync signal inputs per motherboard
  • X fully synchronous derived clocks with sync signals
System RequirementsWorks only with proFPGA uno, duo or quad motherboard
Configuration
  • System configuration via DMBI (Ethernet, USB or PCIe) with proFPGA Builder Software
  • FPGA configuration via QSPI flash or SDIO (μSD card slot) on FPGA module or JTAG on motherboard
PowerExternal (optional) ATX Power Supply (12 V, 24 - 35 A output)
Dimensions
  • 5.91" x 0.95" x 5.91" / 150 mm x 24 mm x 150 mm (width x height x depth)
  • 0.25 kg weight
Product article numberPROF119 FM-XCZU19EG-R1
Order codePROF-FM-XCZU19EG-1/PROF-FM-XCZU19EG-2 (speedgrade 1/2)

FPGA Prototyping Products Overview