proFPGA Multi Interface Board 5

profpga_a-i-mib2__500x500_400x400.png

Technical highlights

  • 1x SD Card Slot, Full Size, UHS-I capable
  • 1x quad USB to UART converter
  • Lauterbach ARM JTAG/ETM Debugger connection
  • 1x Stereo Audio Input & Output via 3.5 mm Jack
  • 1x LIN Transceiver

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA Multi Interface Board 5. This daughter board occupies two extension site of the proFPGA system and provides several interfaces and memories to the user like CAN Controller (SPI Interface) and CAN Transceiver, LIN Transceiver, QSPI Flash 500 Mb/1 Gb, I2S Audio CoDec (Analog Devices AD1938), Stereo Audio Input & Output via 3.5 mm Jack, 2x I²C EEPROM, SD Card Slot, Full Size, UHS-I capable, quad USB to UART converter, Lauterbach ARM JTAG/ETM Debugger connection (2x10-pin Header and Mictor-38), TotalPhase Aardvark I2C/SPI Host Adapter connection (2x5-pin Header), additional 2x10-pin JTAG Header ("Secondary JTAG")and one proFPGA Top Connector.

proFPGA Multi Interface Board 5
proFPGA Connectors

1x proFPGA extension board connector (1 at bottom-side)

Interfaces
  • 1x CAN Controller (SPI Interface) and CAN Transceiver
  • 1x LIN Transceiver
  • 1x Stereo Audio Input & Output via 3.5 mm Jack
  • 1x Lauterbach ARM JTAG/ETM Debugger connection (2x10-pin Header and Mictor-38)
  • 1x TotalPhase Aardvark I2C/SPI Host Adapter connection (2x5-pin Header)
  • 1x additional 2x10-pin JTAG Header ("Secondary JTAG")
  • 1x SD Card Slot, Full Size, UHS-I capable
Others
  • 1x QSPI Flash 500 Mb/1 Gb
  • 1x I2S Audio CoDec (Analog Devices AD1938)
  • 2x I²C EEPROM
  • 1x quad USB to UART converter
Product article numberPROF082 EB-PDS-INTERFACE-R5
Order CodePROF-A-I-MIF5

FPGA Products Overview

© EGARA-CMS ist ein urheberrechtlich geschütztes Produkt der DREIWERKEN GmbH - Ihrer Werbeagentur für Online- und Print-Medien aus Kolbermoor (bei Rosenheim).